-5%
Saci Winner Pump – Winner 75 M / 100 M / 150 M / 200 M / 200 T / 300 T
Self-priming pump for small and medium sized swimming pools
Product Key Benefits:
- Large pre-filter basket for high filter capacity. Helps reduce constant cleaning when pool is excessively dirty
- Transparent polycarbonate lid for easy inspection of prefilter basket interior
- Double connection, threads and fittings. 2″ female thread, PVC glue connections Ø 63 (JIS fittings supplied with pump)
- Cataphoresis painting
- Aluminium support base
- Stainless steel screws AISI-304
- Lubricated bearings for long durability and silent work
- No possible electric contact with the water as no part of the motor is in contact with it
Constructive characteristics:
- Pump body, pump body lid, base and diffuser made of polypropylene that is resistant to pool chemicals, and reinforced with glass fibre for long durability
- Impeller in Noryl
- Shaft in stainless steel AISI-316
- Mechanical seal in AISI-316. Suitable for saltwater pools
- Connection to 2” suction and drive
- Includes an easy open key
Motor:
- Sealed asynchronous motor with external ventilation
- Efficiency class: IE3
- 2,850 rpm @ 50Hz
- IP-55 protection, Class F insulation
- Max Noise: 69dB
MAXIMUM WATER TEMPERATURE: 40º C.
Don’t see the model you are looking for? Contact us!
-5%
Saci Smart Winner Pumps – Smart Winner 100 M / 150 M / 200 M / 300 M
For private and medium-sized pools, with a programmable controller for peace of mind
The new electronic system for pumps SMART Control applicable to the Winner Series is an integral system to command the installation. With a digital switchboard control panel added to the pump, it allows an easy and intuitive installation and complete control of the pool. The system incorporates the necessary protections for the pump and for people, time clocks and entries/exits for the management of the lighting system, salt chlorinator, heat pump, temperature probe, etc.
The system replaces the traditional control panel, and incorporates some new features:
- Control of other pool components:
- Clock programmer for filtration cycle up to 8 cycles a day
- Clock programmer for lighting cycle
- Programmable input for heat pump
- Lights button for Manual ignition, independent built-in countdown with the following ranges: 15 min, 30 min, 60 min, 60 min, 2 h, 4 h, 8 h
- Output for control of lights (also RGB leds)
- Output for salt chlorinator or running pump
- Pump protection:
- Ampère Control for overload
- Audible alarm for fault monitoring
- Control of lack of water / dry running
- Failures and incidents history list
- Totalizer of working hours, total/partial
- Multi language
- Pool cleaning:
- Notifications for sand filter and basket’s needed cleaning
- Skimming function to keep the pool surface clean
- Notifications for maintenance needed based on working hours
Don’t see the model you are looking for? Contact us!
-5%
Saci Optima Pump – Optima 50 M / 75 M / 100 M
Self-priming pump for small pools and spas
Product Key Benefits:
- Large pre-filter basket for high filter capacity. Helps reduce constant cleaning when pool is excessively dirty
- Transparent Polycarbonate lid for easy inspection of prefilter basket interior
- Double connection, threads and fittings. 1 1/2″ female thread, PVC glue connections Ø 50 (JIS fittings supplied with pump)
- Cataphoresis painting
- Aluminium support base
- Stainless steel screws AISI-304
- Lubricated bearings for long durability and silent work
- No possible electric contact with the water as no part of the motor is in contact with it
Constructive characteristics:
- Pump body, pump body lid, base and diffuser made of polypropylene that is resistant to pool chemicals, and reinforced with glass fibre for long durability
- Impeller in Noryl
- Shaft in stainless steel AISI-316
- Mechanical seal in AISI-316. Suitable for saltwater pools
- Connection to 1 1/2” suction and drive
- Includes an easy open key
Motor:
- Sealed asynchronous motor with external ventilation
- 2,850 rpm @ 50Hz
- IP-55 protection, Class F insulation
- Max Noise: 69dB
MAXIMUM WATER TEMPERATURE: 40º C.
Don’t see the model you are looking for? Contact us!
-5%
Saci CF-4 series Centrifugal Pump – CF-4 750 / CF-4 1500 / CF-4 2000 / CF-4 2500
Commercial centrifugal pool pump
Product Key Benefits:
- Large volume low-speed centrifugal pump
- Complete with pre-filter basket (can be removed upon request) in AISI 316
- Motor and pump shafts connected by coupling. Shaft-coupling in AISI 316
- Pump body, support, and impeller in cast iron. Bronze impeller available on request
- Mechanical seal in carbon-silicon carbide. Also available on request: tungsten carbon, AISI 316, EPDM, Viton, etc
- Lubricated bearings for long durability
- Quiet and long lasting from motor’s low speed
- Cataphoresis or epoxy treatment for pump available on request
- Vertical version of pump also available on request
Motor:
- Standard asynchronous motor sealed from external ventilation
- Standard construction – can be replaced by other standard motors at any time and in any place
- Efficiency class: IE3
- 1,450 rpm @ 50Hz
- IP-55 protection, Class F insulation
- Max Noise: 71dB
Don’t see the model you are looking for? Contact us!
-5%
Saci HF-4 series High Pressure Pump – HF-4 758 / HF-4 1008 / HF-4 1508 / HF-4 2008 / HF-4 2508
Commercial centrifugal pool pump catered for filtration at high heights
Product Key Benefits:
- Large volume low-speed centrifugal pump specifically for filtration at tall heights
- Complete with pre-filter basket (can be removed upon request) in AISI 316
- Motor and pump shafts connected by coupling. Shaft-coupling in AISI 316
- Pump body, support, and impeller in cast iron. Bronze impeller available on request
- Mechanical seal in carbon-silicon carbide available on request. Also available: tungsten carbon, AISI 316, EPDM, Viton, etc
- Lubricated bearings for long durability
- Quiet and long lasting from motor’s low speed
- Cataphoresis or epoxy treatment for pump available on request
- Vertical version of pump also available on request
Motor:
- Standard asynchronous motor sealed from external ventilation
- Standard construction – can be replaced by other standard motors at any time and in any place
- Efficiency class: IE3
- 1,450 rpm @ 50Hz
- IP-55 protection, Class F insulation
- Max Noise: 71dB
Don’t see the model you are looking for? Contact us!
-5%
Saci AS Series Submersible Pumps – AS 6/135-4 AS 6/180-3 AS 6/220-3 AS 6/220-4
Applications:
Submersible pumps for 6” wells minimum, highly suitable for civil and industrial installations, in sprinkler irrigation, communities, housing estates, etc
Constructive characteristics:
Submersible pumps with floating impellers and diffusers in Noryl. Each element includes contact rings and diffuser body in stainless steel. Shaft, cladding, sleeve, cable cover, suction grille, rings and bolts in stainless steel. Suction and drive body in stainless steel. Built-in stainless steel retention valve.
Maximum amount of sand: 60 g/m3
Maximum water temperature: +10°C to +40°C
Motor:
Price quoted is for submersible pumps with Saci FR motors. Franklin motors are available on request. Details on motors are further down below.
FR motor is in compliance with DIN and ISO standards with the following main features: Stator in stainless steel and non-toxic oil lubricated, international NEMA coupling, no need for maintenance. Maximum water temperature: + 40ºC
4″ motors are used for powers up to 10HP. 6″ motors are for powers above 10HP. In all cases, motors must adapt to required voltage.
-5%
Saci SP Series Submersible Pumps – SP 25-6 M / SP 40-07 M / SP 40-07 T / SP 70-07 T
Applications:
4” submersible pumps with multiple impellers with a high hydraulic yield. Especially recommended for elevation, distribution and pressurisation in civil and industrial hydraulic installations. Assembly in pressure units, cisterns, irrigation, washing systems, etc.
Constructive characteristics:
Impellers, diffusors, inlet and outlet body are completely manufactured in stainless steel AISI304. Guide ring in special rubber resistant against abrasion. Static and dynamic balanced impellers.
Maximum content of sand in water: 50 g/m3
Water temperature limit: 15ºC to 40ºC
Motor:
Price quoted is for submersible pumps with Saci FR motors. Franklin motors are available on request. Details on motors are further down below.
FR motor is in compliance with DIN and ISO standards with the following main features: Stator in stainless steel and non-toxic oil lubricated, international NEMA coupling, no need for maintenance. Maximum water temperature: + 40ºC
-5%
Saci Winner Pump Motor
Replacement motor for Saci Winner pumps
Option for:
- Winner 100 M (1hp/1ph)
- Winner 150 M (1.5hp/1ph)
- Winner 200 M (2hp/1ph)
- Winner 300 M (3hp/3ph)
-5%
Saci Optima Pump Motor
Replacement motor for Saci Optima pumps
Option for:
- Optima 50 M (0.5hp/1ph)
- Optima 75 M (0.75hp/1ph)
- Optima 100 M (1hp/1ph)