Technical Information:
Model | Power | “A” | Flow m3/h | ⌀ Motor |
Length | |||||||||||
HP | KW | III 230 |
III 400 |
0 | 3 | 6 | 12 | 18 | 24 | 30 | 36 | 42 | 48 | |||
Manometric height w.c.m. | ||||||||||||||||
AS 6/135-4 | 5.5 | 4 | 16.4 | 9.5 | 55 | 53 | 51 | 47 | 40 | 32 | 22 | 10 | 4″ | 1161 | ||
AS 6/180-3 | 5,5 | 4 | 16.4 | 9.5 | 45 | 43 | 40 | 38 | 35 | 24 | 16 | 8 | 4″ | 1113 |
Outlet ⌀: 3″
Model | Power | “A” | Flow m3/h | ⌀ Motor |
Length | |||||||||
HP | KW | III 230 |
III 400 |
0 | 8 | 16 | 24 | 30 | 42 | 52 | 60 | |||
Manometric height w.c.m. | ||||||||||||||
AS 6/220-3 | 7.5 | 5.5 | 22.1 | 12.8 | 37 | 36 | 35 | 32 | 28 | 20 | 14 | 7 | 4″ | 1227 |
AS 6/220-4 | 10 | 7.5 | 28.2 | 16.3 | 50 | 49 | 47 | 43 | 38 | 27 | 25 | 12 | 6″ | 1250 |
Outlet ⌀: 3″
Motors:
Franklin Motors
Applications: Hermetic motors manufactured in compliance with DIN and ISO 9001 standards. Filled with international NEMA coupling. Fully made in stainless steel 304. The 4″ single phase motors require external capacitor. All motors are supplied with one or two wires depending on the start mode.
Constructive characteristics: Encapsulated or rewindable stator. Seal and protector included for a better performance against sand. Option for both horizontal and vertical installation. Motors from 6″ to 10″ dan be supplied with direct start or star delta.
Motor:
- 4″ single-phase encapsulated motors (up to 3HP)
- Three-phase 230V up to 7.5HP
- Three-phase 230V up to 10HP
- 6″ encapsulated motors up to 60HP and rewindable up to 45HP
- 8″ encapsulated motors up to 200HP and rewindable up to 125HP
- 10″ motors rewindable up to 250HP
Also available on request: special voltages and/or construction in AISI 316
Saci FR Motors
Applications: Electrical FR motors for submersible pumps with 4″, and also 6″, 8″, 10″ with NEMA coupling. The 4″ motors are filled with non-toxic dielectric oil. This motor is suitable for all types of applications and is specially recommended in installations with low net tension, and in tank pools thanks to its easy cooling avility.
The 6″, 8″, 10″ motors are all rewindable, and equipped with radial and axial bearings of dual rotation, and water lubricated.
Constructive characteristics: Manufactured fully in AISI 304. Rewindable stator. Standard NEMA coupling. Wire with resin filled connector. Maximum number of starts: 150 per hour (for 4″ motors only). Maximum depth: 200m underwater (for 4″ motors only). IP68 protection, isolation Class E. Maximum water temperature: 40ºC