Showing 1–9 of 14 results

Pentair IntelliFloVF variable flow self-priming pump -5%

Pentair IntelliFlo VF (Variable Flow) Pump – 011012

Login to view prices
Pool Pumps

IntelliFlo Variable Flow (VF) High Performance Pumps

The IntelliFlo Variable Flow (VF) pumps has an onboard computer and intelligent software to automatically calculate and program the minimum flow requirements for every pool task–filtering, heating, cleaning, spa jets, water features, and more–to optimize performance and minimize energy use. As functions/tasks change, IntelliFlo self-adjusts to maintain optimal flow rates for further energy savings.

Featured Highlights

  • Automatically monitors and adjusts flow rates to optimize performance and minimize energy use — reduces energy consumption by up to 90%
  • Built-in diagnostics protect the Intelliflo pump from the most common causes of premature failure — loss of prime, overheating, freezing and voltage irregularities
  • Permanent magnet motor and TEFC (totally enclosed fan cooled) design assure quietest operation of any pool pump
  • Super-efficient permanent magnet motors produce far less heat and vibration, resulting in less stress and wear on pump components for longer life
  • Compatible with IntelliTouch®, EasyTouch® and SunTouch® pool control systems
  • Certification: CE, NSF, UL and CSA Listed
  • Robust On Board Power Factor Correction
  • Technical details below

 

Pentair WhisperFlo self-priming pump in older design. It is beige-coloured with transparent lid for prefilter. -17%

Pentair WhisperFlo Pump – 347926-INT / 347927-INT / 347928-INT / 347929-INT / 011643 / 011644 / AP011516 / WHFL-1500-1P

Login to view prices
Pool Pumps

WhisperFlo High Performance Pumps

Robust thermoplastic with the Cam & Ramp™ See-Through Lid design. Self-priming, high flow with Funnel-Flo™ Diffusers. 2 in. suction and discharge ports. Motor features threaded shaft and durable commercial duty 56 frame motor.

Featured Highlights

  • Oversized strainer basket and volute – industry standard in pool pumps
  • TEFC Motor available
  • Lower HP’s deliver higher performance than industry standard
  • Compatible with all cleaning systems, various filters and jet action spas
  • Heavy-duty/durable construction designed for long life
  • Designed for residential and commercial applications
Pentair WhisperFloXF three-phase super-duty pump, beige-coloured with transparent lid for prefilter. -5%

Pentair WhisperFloXF Pump – 022019

Login to view prices
Pool Pumps

WhisperFloXF High Performance Pumps – For High Flow

Developed using the most advanced engineering tools available – CFD (Computational Fluid Dynamics) and FEA (Finite Element Analysis). The impeller design delivers high level of precision concentricity for increased efficiency.

Product Features:

  • UL and NSF certified
  • Drop-in replacement for all WhisperFlo Pump models. Simple replacement for Challenger Pumps
  • Union connectors included for connecting directly to 2.5 in or 3 in. plumbing
  • Extra large, robust basket with smooth surface for easy debris removal
  • Easy-carry handle; easily removable ergonomic lock ring; and see through lid for easy basket inspection
  • Three Phase XF pumps are compatible with Pentair’s Acu Drive XS VFD’s
  • Technical details below
Sta-rite swimming pool circulation pump model 5P6RH-3 -5%

Sta-Rite Max-E-Pro Pump – 5P6RH-3

Login to view prices
Pool Pumps

Sta-Rite High-Efficiency Pool/Spa Pumps

The Sta-Rite 5P6R pumps are precision molded of reinforced fiberglass. This lightweight, exceptionally strong, thermoplastic pump is designed for much higher pressure operation.  Temperature and corrosion resistant.

Product features:

  • Self-priming, up to 5 m above water level
  • A heavy duty totally enclosed fan cooled (TEFC) motor for maximum efficiency and long life – all single phase motors are thermally protected
  • Moves larger volumes of water, resulting in lower operation costs
  • Stainless steel locking clamp for quick and easy servicing
  • ‘See Thru’ trap lid for easy checking of debris – QuickLock™ trap cover ring for fast access to strainer basket
  • A specially designed base for dampening of sound and vibrations
  • Easy to install
  • Technical details below
Saci Winner self-priming pump with transparent lid for pre-filter basket. -5%

Saci Winner Pump – Winner 75 M / 100 M / 150 M / 200 M / 200 T / 300 T

Login to view prices
Pool Pumps

Self-priming pump for small and medium sized swimming pools

Product Key Benefits:

  • Large pre-filter basket for high filter capacity. Helps reduce constant cleaning when pool is excessively dirty
  • Transparent polycarbonate lid for easy inspection of prefilter basket interior
  • Double connection, threads and fittings. 2″ female thread, PVC glue connections Ø 63 (JIS fittings supplied with pump)
  • Cataphoresis painting
  • Aluminium support base
  • Stainless steel screws AISI-304
  • Lubricated bearings for long durability and silent work
  • No possible electric contact with the water as no part of the motor is in contact with it

Constructive characteristics:

  • Pump body, pump body lid, base and diffuser made of polypropylene that is resistant to pool chemicals, and reinforced with glass fibre for long durability
  • Impeller in Noryl
  • Shaft in stainless steel AISI-316
  • Mechanical seal in AISI-316. Suitable for saltwater pools
  • Connection to 2” suction and drive
  • Includes an easy open key

Motor:

  • Sealed asynchronous motor with external ventilation
  • Efficiency class: IE3
  • 2,850 rpm @ 50Hz
  • IP-55 protection, Class F insulation
  • Max Noise: 69dB

MAXIMUM WATER TEMPERATURE: 40º C.

Don’t see the model you are looking for? Contact us!

Saci Smart Winner self-priming pump in black-coloured body, transparent lid, and controller on motor box. -5%

Saci Smart Winner Pumps – Smart Winner 100 M / 150 M / 200 M / 300 M

Login to view prices
Pool Pumps

For private and medium-sized pools, with a programmable controller for peace of mind

The new electronic system for pumps SMART Control applicable to the Winner Series is an integral system to command the installation. With a digital switchboard control panel added to the pump, it allows an easy and intuitive installation and complete control of the pool. The system incorporates the necessary protections for the pump and for people, time clocks and entries/exits for the management of the lighting system, salt chlorinator, heat pump, temperature probe, etc.

The system replaces the traditional control panel, and incorporates some new features:

  1. Control of other pool components:
    • Clock programmer for filtration cycle up to 8 cycles a day
    • Clock programmer for lighting cycle
    • Programmable input for heat pump
    • Lights button for Manual ignition, independent built-in countdown with the following ranges: 15 min, 30 min, 60 min, 60 min, 2 h, 4 h, 8 h
    • Output for control of lights (also RGB leds)
    • Output for salt chlorinator or running pump
  2. Pump protection:
    • Ampère Control for overload
    • Audible alarm for fault monitoring
    • Control of lack of water / dry running
    • Failures and incidents history list
    • Totalizer of working hours, total/partial
    • Multi language
  3. Pool cleaning:
    • Notifications for sand filter and basket’s needed cleaning
    • Skimming function to keep the pool surface clean
    • Notifications for maintenance needed based on working hours

Don’t see the model you are looking for? Contact us!

Saci Optima self-priming pump in black-coloured body with transparent prefilter lid. -5%

Saci Optima Pump – Optima 50 M / 75 M / 100 M

Login to view prices
Pool Pumps

Self-priming pump for small pools and spas

Product Key Benefits:

  • Large pre-filter basket for high filter capacity. Helps reduce constant cleaning when pool is excessively dirty
  • Transparent Polycarbonate lid for easy inspection of prefilter basket interior
  • Double connection, threads and fittings. 1 1/2″ female thread, PVC glue connections Ø 50 (JIS fittings supplied with pump)
  • Cataphoresis painting
  • Aluminium support base
  • Stainless steel screws AISI-304
  • Lubricated bearings for long durability and silent work
  • No possible electric contact with the water as no part of the motor is in contact with it

Constructive characteristics:

  • Pump body, pump body lid, base and diffuser made of polypropylene that is resistant to pool chemicals, and reinforced with glass fibre for long durability
  • Impeller in Noryl
  • Shaft in stainless steel AISI-316
  • Mechanical seal in AISI-316. Suitable for saltwater pools
  • Connection to 1 1/2” suction and drive
  • Includes an easy open key

Motor:

  • Sealed asynchronous motor with external ventilation
  • 2,850 rpm @ 50Hz
  • IP-55 protection, Class F insulation
  • Max Noise: 69dB

MAXIMUM WATER TEMPERATURE: 40º C.

Don’t see the model you are looking for? Contact us!

Saci CF-4 series horizontal centrifugal pump in green-colored-coated body with prefilter -5%

Saci CF-4 series Centrifugal Pump – CF-4 750 / CF-4 1500 / CF-4 2000 / CF-4 2500

Login to view prices
Pool Pumps

Commercial centrifugal pool pump

Product Key Benefits:

  • Large volume low-speed centrifugal pump
  • Complete with pre-filter basket (can be removed upon request) in AISI 316
  • Motor and pump shafts connected by coupling. Shaft-coupling in AISI 316
  • Pump body, support, and impeller in cast iron. Bronze impeller available on request
  • Mechanical seal in carbon-silicon carbide. Also available on request: tungsten carbon, AISI 316, EPDM, Viton, etc
  • Lubricated bearings for long durability
  • Quiet and long lasting from motor’s low speed
  • Cataphoresis or epoxy treatment for pump available on request
  • Vertical version of pump also available on request

Motor:

  • Standard asynchronous motor sealed from external ventilation
  • Standard construction – can be replaced by other standard motors at any time and in any place
  • Efficiency class: IE3
  • 1,450 rpm @ 50Hz
  • IP-55 protection, Class F insulation
  • Max Noise: 71dB

Don’t see the model you are looking for? Contact us!

Saci HF-4 series horizontal centrifugal pump in green-colored-coated body with prefilter -5%

Saci HF-4 series High Pressure Pump – HF-4 758 / HF-4 1008 / HF-4 1508 / HF-4 2008 / HF-4 2508

Login to view prices
Pool Pumps

Commercial centrifugal pool pump catered for filtration at high heights

Product Key Benefits:

  • Large volume low-speed centrifugal pump specifically for filtration at tall heights
  • Complete with pre-filter basket (can be removed upon request) in AISI 316
  • Motor and pump shafts connected by coupling. Shaft-coupling in AISI 316
  • Pump body, support, and impeller in cast iron. Bronze impeller available on request
  • Mechanical seal in carbon-silicon carbide available on request. Also available: tungsten carbon, AISI 316, EPDM, Viton, etc
  • Lubricated bearings for long durability
  • Quiet and long lasting from motor’s low speed
  • Cataphoresis or epoxy treatment for pump available on request
  • Vertical version of pump also available on request

Motor:

  • Standard asynchronous motor sealed from external ventilation
  • Standard construction – can be replaced by other standard motors at any time and in any place
  • Efficiency class: IE3
  • 1,450 rpm @ 50Hz
  • IP-55 protection, Class F insulation
  • Max Noise: 71dB

Don’t see the model you are looking for? Contact us!