Harvia CX-180S Control Unit for 2kW to 8kW Harvia Electric Heaters
Control unit for Harvia electric heaters ranging from 2kW to 8kW
Product Features:
- Unique touch screen function
- Controls temperature, lighting, operation time and fan
- Adjustable temperature from 40 to 110℃
Pahlen Overheating Limit Control unipole 60℃ – 632001
Overheating limit control unipole 60℃
Product Information | |
---|---|
Part Number | 632001 |
Item Name | Overheating limit control unipole 60℃ |
Compatible models | All Pahlen electric heaters |
Pahlen Flow Switch 0.5″ Brass Connection New Design – 12870
Flow switch with 1/2″ Brass Connection for Pahlen Compact (#1398XXXX) Electric Heaters – New Design
For old design see: #12860
Product Information | |
---|---|
Part Number | 12870 |
Item Name | Flow switch, external connection 1/2″ |
Compatible models | Compact Electric Heaters (#1398XXXX) |
Pahlen Flow Switch 0.5″ Brass Connection Old Design – 12860
Flow switch with 1/2″ Brass Connection for Pahlen Compact (#1398XXXX) Electric Heaters – Old Design
For new design see: #12870
Product Information | |
---|---|
Part Number | 12860 |
Item Name | Flow switch 230V/80W 1/2″ connection |
Compatible models | Compact Electric Heaters (#1398XXXX) |
Pahlen Thermostat 0 to 45℃ – 632009 – for 2022 onwards
Thermostat with 0 – 45℃ temperature range, unipole, with earth connection, for newer models of Pahlen electric heaters
Thermostat with graduated knob, single-pole, for installation in a junction box. The sensor is a flask that ends with a movable membrane. When the liquid in the flask is heated, excess pressure is transferred to the membrane, which deforms and opens the contact group. The opening temperature can be changed with the adjusting screw.
Product Information | |
---|---|
Part Number | 632009 |
Item Name | Thermostat 0 – 45℃, unipole |
Compatible models |
|
For older models, see: #12843 and #632002 (without earth connection)
Hayward Pressure Gauge Back Mount
Hayward Back Mount PRESSURE GAUGE replacement for
- Hayward Perflex EC65 SERIES
- Hayward Perflex EC65A SERIES
- Hayward Perflex EC75 SERIES
- Hayward Perflex EC75A SERIES
Hayward VariFlo Top/Side Mount Multiport Valves with 6 positions
Harvia ZG-410 Printed Circuit Board for HGS Steam Generator
Printed circuit board (model: ZG-410) for Harvia HGS Series Steam Generators.
Harvia HGX11 Steam Generator – 10.8kW/400V/3-phase
HGX11 Steam Generator – 10.8kW Steel
For steam rooms to relax your mind and soul
In the course of more than 60 years, Harvia has grown into the world’s largest sauna heater and stove manufacturer. Trust their products to create the perfect spa experiences to match your dreams.
Product Features:
- Easy to use, easy maintenance
- The steam generator is controlled by a separate touch-screen control panel that can also control fragrance pump, lighting, and fan
- Water level is measured in clean water, in a separate measuring cup to prevent problems caused by water impurities
- A sediment cup collects water impurities that fall on the bottom of the water container
- Designed for high output demanding spa use
- Steamer can be installed in a low space, i.e. on top of a steam cabin
- The steam and water connections are on the side of the unit
- Up to three HGX11L extra power units can be linked with a basic steam generator to be controlled with the same control panel
Product Information | ||
---|---|---|
Model | HGX11 | |
Power Output | 10.8kW | |
Steam Output Capacity | 14.5kg/h | |
Control Type | Separate unit, WX602 | |
Installation Location | Wall | |
Installation Orientation | Vertically | |
Colour and Material | Stainless Steel, Steel | |
Prime Energy / Fuel | Electric high voltage 400/230V, 3ph |
*Note: The control is sold separately
Top Sellers
- High quality filtration down to 2 microns
- Strong pumps for unparalleled suction
- Strong trapping of dirt; no back flow of dirt into pools
- Adjustable nozzles for greater filter suction
- Smart navigation and Gyroscope equipped — no messy travels
- Pre-programmed to prioritize floors — no fretting over tough, unreachable corners, and no time wasted over constant up and down walls
- Wall detection “Touch n Go” function — robot detects the wall as it approaches to reduce time reversing at each wall touch
- Pre-programmed to self-save when met with an obstacle — simply wait 2 minutes; no rescuing needed
- Control over smartphone App — control your robot right from your couch
- PVA brushes to clean all pool types, shapes, and sizes
- Top access filters for easy removal and prevents dirt from spilling everywhere
- Transparent filter lids for quick visual check on filter fullness
- Filter full indicator on power supply box
- Electronical swivel cable that prevents tangling, and is of high-quality material to ensure lastingness
- Dual drive motors to move in all directions
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.55m, diameter up to 0.7m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.5m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
BWT P600 APP Pool Robotic Cleaner with 23m cable and trolley
For large residential pools or small commercial pools
Powerful suction. Captures the finest dirt. Simple to use. Capable of handling tight spaces. Suitable for all pool types.
Cleaning capabilities:
Software Features:
Hardware Features:
Video & Technical Details below!
Messner Fountain Nozzle Bell Jet – 150 / 001240
Fountain jet nozzle with bell pattern.
Product Features:
Technical Specification | |
---|---|
Model | Bell Jet |
Part No. | 150 / 001240 |
Connection | 20mm |
Messner Foam Jet Fountain Nozzle – 150 / 001170
Foaming fountain nozzle jet.
Product Features:
Technical Specification | |
---|---|
Model | Foam Jet |
Part No. | 150 / 001170 |
Connection | 20mm |