Hayward Pressure Gauge Back Mount
Hayward Back Mount PRESSURE GAUGE replacement for
- Hayward Perflex EC65 SERIES
- Hayward Perflex EC65A SERIES
- Hayward Perflex EC75 SERIES
- Hayward Perflex EC75A SERIES
EFFAST PVC-U Transparent Spring Check Valve
EFFAST CV valve is a PVC-U spring check valve ideal for use in applications that require precise closure and noiseless movement. CV check valve is suitable for use in water treatment, SPAs and pools.
Technical features:
- Solvent welded sockets (ISO, BS) or BSPP threaded sockets.
- Suitable for vertical and horizontal installation
- Stainless Steel spring
- Nominal pressure: PN 16 bar 232 psi
- EPDM or FKM O-ring
EFFAST JIS PVC-U Double/True Union Ball Valve
PVC-U true/double union ball valve ideal for applications in the feld of agriculture, swimming pools, light water treatment and non-critical chemicals.
Technical features:
- JIS Solvent welded socket
- Nominal pressure (PN): 16 bar – 232 psi
- Floating full bore ball locked in place on both sides.
- Fully round ball smoothed by special turning machines.
- Machined stem seat.
- PE ball seat.
- EPDM or FKM O-rings.
- Ergonomic handle with integrated tool for removing of union bushings and adjust the call seat carrier.
- Potable water approval.
- Marine Application approval.
- CE approval.
Hayward VariFlo Top/Side Mount Multiport Valves with 6 positions
Saci Winner Pump Motor
Replacement motor for Saci Winner pumps
Option for:
- Winner 100 M (1hp/1ph)
- Winner 150 M (1.5hp/1ph)
- Winner 200 M (2hp/1ph)
- Winner 300 M (3hp/3ph)
Saci Optima Pump Motor
Replacement motor for Saci Optima pumps
Option for:
- Optima 50 M (0.5hp/1ph)
- Optima 75 M (0.75hp/1ph)
- Optima 100 M (1hp/1ph)
Saci SP Series Submersible Pumps – SP 25-6 M / SP 40-07 M / SP 40-07 T / SP 70-07 T
Applications:
4” submersible pumps with multiple impellers with a high hydraulic yield. Especially recommended for elevation, distribution and pressurisation in civil and industrial hydraulic installations. Assembly in pressure units, cisterns, irrigation, washing systems, etc.
Constructive characteristics:
Impellers, diffusors, inlet and outlet body are completely manufactured in stainless steel AISI304. Guide ring in special rubber resistant against abrasion. Static and dynamic balanced impellers.
Maximum content of sand in water: 50 g/m3
Water temperature limit: 15ºC to 40ºC
Motor:
Price quoted is for submersible pumps with Saci FR motors. Franklin motors are available on request. Details on motors are further down below.
FR motor is in compliance with DIN and ISO standards with the following main features: Stator in stainless steel and non-toxic oil lubricated, international NEMA coupling, no need for maintenance. Maximum water temperature: + 40ºC
Saci HF-4 series High Pressure Pump – HF-4 758 / HF-4 1008 / HF-4 1508 / HF-4 2008 / HF-4 2508
Commercial centrifugal pool pump catered for filtration at high heights
Product Key Benefits:
- Large volume low-speed centrifugal pump specifically for filtration at tall heights
- Complete with pre-filter basket (can be removed upon request) in AISI 316
- Motor and pump shafts connected by coupling. Shaft-coupling in AISI 316
- Pump body, support, and impeller in cast iron. Bronze impeller available on request
- Mechanical seal in carbon-silicon carbide available on request. Also available: tungsten carbon, AISI 316, EPDM, Viton, etc
- Lubricated bearings for long durability
- Quiet and long lasting from motor’s low speed
- Cataphoresis or epoxy treatment for pump available on request
- Vertical version of pump also available on request
Motor:
- Standard asynchronous motor sealed from external ventilation
- Standard construction – can be replaced by other standard motors at any time and in any place
- Efficiency class: IE3
- 1,450 rpm @ 50Hz
- IP-55 protection, Class F insulation
- Max Noise: 71dB
Don’t see the model you are looking for? Contact us!
Saci CF-4 series Centrifugal Pump – CF-4 750 / CF-4 1500 / CF-4 2000 / CF-4 2500
Commercial centrifugal pool pump
Product Key Benefits:
- Large volume low-speed centrifugal pump
- Complete with pre-filter basket (can be removed upon request) in AISI 316
- Motor and pump shafts connected by coupling. Shaft-coupling in AISI 316
- Pump body, support, and impeller in cast iron. Bronze impeller available on request
- Mechanical seal in carbon-silicon carbide. Also available on request: tungsten carbon, AISI 316, EPDM, Viton, etc
- Lubricated bearings for long durability
- Quiet and long lasting from motor’s low speed
- Cataphoresis or epoxy treatment for pump available on request
- Vertical version of pump also available on request
Motor:
- Standard asynchronous motor sealed from external ventilation
- Standard construction – can be replaced by other standard motors at any time and in any place
- Efficiency class: IE3
- 1,450 rpm @ 50Hz
- IP-55 protection, Class F insulation
- Max Noise: 71dB
Don’t see the model you are looking for? Contact us!
Top Sellers
- High quality filtration down to 2 microns
- Strong pumps for unparalleled suction
- Strong trapping of dirt; no back flow of dirt into pools
- Adjustable nozzles for greater filter suction
- Smart navigation and Gyroscope equipped — no messy travels
- Pre-programmed to prioritize floors — no fretting over tough, unreachable corners, and no time wasted over constant up and down walls
- Wall detection “Touch n Go” function — robot detects the wall as it approaches to reduce time reversing at each wall touch
- Pre-programmed to self-save when met with an obstacle — simply wait 2 minutes; no rescuing needed
- Control over smartphone App — control your robot right from your couch
- PVA brushes to clean all pool types, shapes, and sizes
- Top access filters for easy removal and prevents dirt from spilling everywhere
- Transparent filter lids for quick visual check on filter fullness
- Filter full indicator on power supply box
- Electronical swivel cable that prevents tangling, and is of high-quality material to ensure lastingness
- Dual drive motors to move in all directions
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.55m, diameter up to 0.7m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.5m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
BWT P600 APP Pool Robotic Cleaner with 23m cable and trolley
For large residential pools or small commercial pools
Powerful suction. Captures the finest dirt. Simple to use. Capable of handling tight spaces. Suitable for all pool types.
Cleaning capabilities:
Software Features:
Hardware Features:
Video & Technical Details below!
Messner Fountain Nozzle Bell Jet – 150 / 001240
Fountain jet nozzle with bell pattern.
Product Features:
Technical Specification | |
---|---|
Model | Bell Jet |
Part No. | 150 / 001240 |
Connection | 20mm |
Messner Foam Jet Fountain Nozzle – 150 / 001170
Foaming fountain nozzle jet.
Product Features:
Technical Specification | |
---|---|
Model | Foam Jet |
Part No. | 150 / 001170 |
Connection | 20mm |