Hayward 1.5″ SLIP Inlet Fitting, (0.75″/1″ Opening)
Hayward’s directional flow inlet and vac lock safety wall fittings are a perfect match with our concrete, vinyl and fiberglass inlet fittings.
Hayward 1.5″ MIP Inlet, (0.75″/1″ Opening)
Hayward’s directional flow inlet and vac lock safety wall fittings are a perfect match with our concrete, vinyl and fiberglass inlet fittings.
Hayward 1.5″FIP / SKT Fitting with Locknut & Gasket
Hayward’s Vinyl and Fiberglass inlet fittings have 1.5″ internal threads for use with directional fittings, plugs, grate inserts, outlet covers and JetAir hydrotherapy fittings.
Hayward 9″ x 9″ Square Gate Only
For residential and commercial concrete pools, Hayward square drain covers are available in a wide range of sizes and flow designs to satisfy any installation requirement. Whether the application demands frames and covers for new construction or replacement cover assemblies for existing installations, Hayward suction outlets set the standard for quality and value.
Hayward’s new Low Velocity suction outlets are specifically designed for applications with requirements limiting the maximum flow velocity to 1.5 feet per second. In addition, Hayward’s High Flow covers have some of the industry’s highest ASME approved flow rates. Each size and flow design cover retrofit to existing Hayward frames and are designed for an extensive 7 year life span. All Hayward WG Series suction outlets and replacement covers are VGB compliant and are tested to ASME A112 19.8b-2009 and ANSI/APSP-16 standards as well as meeting CPSC requirements.
Installation of anything other than the recommended Hayward drain cover on a Hayward frame or Hayward sump may not be ASME A112 19.8b-2009 and ANSI/ APSP-16 compliant. Likewise, the installation of a Hayward drain cover on a non-Hayward frame may not be compliant.
SpecificationsModel: WG1031HF2PAK2
Approved Flow GPM Floor (Horizontal): 264
Size: 9” x 9”
Cover Open Area Sq. Inch: 23.18
1.5ft/sec. Flow Rate GPM: 112
Approved Flow GPM Wall (Vertical): 224
Hayward AstroLite Light 300W/12V/15′ Cord (Thermoplastic / Stainless Steel Rim)
Hayward ABS DuraNiche (rear) – fits AstroLite/AstroLite II
DuraNiche™ niches are injection-molded of PVC for superior performance, non-corrosive durability and plumbing versatility – plus the lowest installed cost. They come in three models for concrete/gunite pools, vinyl/fiberglass pools, or for concrete/gunite spas. When paired with a Hayward ColorLogic®, AstroLite™ or AstroLite™ ll light fixture, you have the best quality and value in a lighting system available anywhere.
- Injection molded PVC fixture housing for corrosion free performance
- Socket conduit connection designed for quick and simple gluing to PVC pipe. Provides a clean, reliable seal
- U.L. approved sweep elbow fitting, coupling and reducer, included in SP0600U, SP0607U, SP0608U and SP0601U, meet the highest standard and provide the most convenient installation
- All SP0600U, SP0607U and SP0608U niches have a 45 degree 1in outlet, which can be adjusted for top or rear conduit connection using the 45 degree U.L. approved sweep elbow (included). The SP0601U niche has a 1in rear outlet which can be adjusted to 45 degrees
Hayward Cartridge Element Filter Media
Hayward Cartridge Element replacements
Top Sellers
- High quality filtration down to 2 microns
- Strong pumps for unparalleled suction
- Strong trapping of dirt; no back flow of dirt into pools
- Adjustable nozzles for greater filter suction
- Smart navigation and Gyroscope equipped — no messy travels
- Pre-programmed to prioritize floors — no fretting over tough, unreachable corners, and no time wasted over constant up and down walls
- Wall detection “Touch n Go” function — robot detects the wall as it approaches to reduce time reversing at each wall touch
- Pre-programmed to self-save when met with an obstacle — simply wait 2 minutes; no rescuing needed
- Control over smartphone App — control your robot right from your couch
- PVA brushes to clean all pool types, shapes, and sizes
- Top access filters for easy removal and prevents dirt from spilling everywhere
- Transparent filter lids for quick visual check on filter fullness
- Filter full indicator on power supply box
- Electronical swivel cable that prevents tangling, and is of high-quality material to ensure lastingness
- Dual drive motors to move in all directions
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.55m, diameter up to 0.7m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.5m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
BWT P600 APP Pool Robotic Cleaner with 23m cable and trolley
For large residential pools or small commercial pools
Powerful suction. Captures the finest dirt. Simple to use. Capable of handling tight spaces. Suitable for all pool types.
Cleaning capabilities:
Software Features:
Hardware Features:
Video & Technical Details below!
Messner Fountain Nozzle Bell Jet – 150 / 001240
Fountain jet nozzle with bell pattern.
Product Features:
Technical Specification | |
---|---|
Model | Bell Jet |
Part No. | 150 / 001240 |
Connection | 20mm |
Messner Foam Jet Fountain Nozzle – 150 / 001170
Foaming fountain nozzle jet.
Product Features:
Technical Specification | |
---|---|
Model | Foam Jet |
Part No. | 150 / 001170 |
Connection | 20mm |