Saci AS Series Submersible Pumps – AS 6/135-4 AS 6/180-3 AS 6/220-3 AS 6/220-4
Applications:
Submersible pumps for 6” wells minimum, highly suitable for civil and industrial installations, in sprinkler irrigation, communities, housing estates, etc
Constructive characteristics:
Submersible pumps with floating impellers and diffusers in Noryl. Each element includes contact rings and diffuser body in stainless steel. Shaft, cladding, sleeve, cable cover, suction grille, rings and bolts in stainless steel. Suction and drive body in stainless steel. Built-in stainless steel retention valve.
Maximum amount of sand: 60 g/m3
Maximum water temperature: +10°C to +40°C
Motor:
Price quoted is for submersible pumps with Saci FR motors. Franklin motors are available on request. Details on motors are further down below.
FR motor is in compliance with DIN and ISO standards with the following main features: Stator in stainless steel and non-toxic oil lubricated, international NEMA coupling, no need for maintenance. Maximum water temperature: + 40ºC
4″ motors are used for powers up to 10HP. 6″ motors are for powers above 10HP. In all cases, motors must adapt to required voltage.
Saci SP Series Submersible Pumps – SP 25-6 M / SP 40-07 M / SP 40-07 T / SP 70-07 T
Applications:
4” submersible pumps with multiple impellers with a high hydraulic yield. Especially recommended for elevation, distribution and pressurisation in civil and industrial hydraulic installations. Assembly in pressure units, cisterns, irrigation, washing systems, etc.
Constructive characteristics:
Impellers, diffusors, inlet and outlet body are completely manufactured in stainless steel AISI304. Guide ring in special rubber resistant against abrasion. Static and dynamic balanced impellers.
Maximum content of sand in water: 50 g/m3
Water temperature limit: 15ºC to 40ºC
Motor:
Price quoted is for submersible pumps with Saci FR motors. Franklin motors are available on request. Details on motors are further down below.
FR motor is in compliance with DIN and ISO standards with the following main features: Stator in stainless steel and non-toxic oil lubricated, international NEMA coupling, no need for maintenance. Maximum water temperature: + 40ºC
Saci Winner Pump Motor
Replacement motor for Saci Winner pumps
Option for:
- Winner 100 M (1hp/1ph)
- Winner 150 M (1.5hp/1ph)
- Winner 200 M (2hp/1ph)
- Winner 300 M (3hp/3ph)
Saci Optima Pump Motor
Replacement motor for Saci Optima pumps
Option for:
- Optima 50 M (0.5hp/1ph)
- Optima 75 M (0.75hp/1ph)
- Optima 100 M (1hp/1ph)
PSH Pools Filtro 100/100 Prefilter
Cast iron pre-filters for suspended solids filtration. Placed at the pump’s inlet, they prevent impeller blocking. The system of cover fixing allows an easy access to the pre-filter basket for maintenance.
• Working pressure: 2 Bar.
• Working temperature: 60ºC Max.
Pre-filter housing and cover: Cast Iron.
Basket: Stainless Steel AISI 304.
Top Sellers
- High quality filtration down to 2 microns
- Strong pumps for unparalleled suction
- Strong trapping of dirt; no back flow of dirt into pools
- Adjustable nozzles for greater filter suction
- Smart navigation and Gyroscope equipped — no messy travels
- Pre-programmed to prioritize floors — no fretting over tough, unreachable corners, and no time wasted over constant up and down walls
- Wall detection “Touch n Go” function — robot detects the wall as it approaches to reduce time reversing at each wall touch
- Pre-programmed to self-save when met with an obstacle — simply wait 2 minutes; no rescuing needed
- Control over smartphone App — control your robot right from your couch
- PVA brushes to clean all pool types, shapes, and sizes
- Top access filters for easy removal and prevents dirt from spilling everywhere
- Transparent filter lids for quick visual check on filter fullness
- Filter full indicator on power supply box
- Electronical swivel cable that prevents tangling, and is of high-quality material to ensure lastingness
- Dual drive motors to move in all directions
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.55m, diameter up to 0.7m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.5m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
BWT P600 APP Pool Robotic Cleaner with 23m cable and trolley
For large residential pools or small commercial pools
Powerful suction. Captures the finest dirt. Simple to use. Capable of handling tight spaces. Suitable for all pool types.
Cleaning capabilities:
Software Features:
Hardware Features:
Video & Technical Details below!
Messner Fountain Nozzle Bell Jet – 150 / 001240
Fountain jet nozzle with bell pattern.
Product Features:
Technical Specification | |
---|---|
Model | Bell Jet |
Part No. | 150 / 001240 |
Connection | 20mm |
Messner Foam Jet Fountain Nozzle – 150 / 001170
Foaming fountain nozzle jet.
Product Features:
Technical Specification | |
---|---|
Model | Foam Jet |
Part No. | 150 / 001170 |
Connection | 20mm |