BSV Salt Chlorinator Replacement Cell 10g/h – RP10/3
Replacement cell for BSV salt water chlorinator – BSsalt-10
Cells are manufactured under BSPOOL’s proprietary LCC (Long Life Cell) concept, offering greater durability of the cells to extend the life of the saline chlorination equipment to 10,000 hours.
This item comes complete with cell housing and connecting wire.
Product Information | ||
---|---|---|
Model | RP10/3 | |
Salt generation rate | 10g/h | |
Compatible Salt Chlorinator Model | BSsalt-10 | |
Plate composition | Material of reverse polarity CE 400 | |
Cell life | Up to 10,000 hours | |
Cell bolts, Support of Cell Assembly and Water Sensor material | Titanium | |
Cell connector material | Stainless Steel | |
Plate amperage | Approx. 400 amperes per square meter | |
Voltage at probe | Approx. 8 volts | |
Cell housing material | ABS | |
Glass tube diameter | 50mm | |
Cable section and length | 4mm x 1.5m |
Note: This cell is only for the older models, BSsalt, with 10k hours of cell life. The newer models, N-BSsalt, uses cells with 5k hours lifespan.
BSV pH Probe / Sensor with 6m cable – H035-SPD01-M06
pH probe / sensor only from Kit Auto.
The pH probe effectively measures the pH level of the pool water and aids the machine in managing the salt chlorination process.
Item code no.: H035-SPD01-M06
BSV ORP Probe / Sensor – R035-9002-M06
ORP gold probe / sensor only from Kit Advanced.
The ORP probe is to measure the redox potential of the pool water.
Item code no.: R035-9002-M06
BSV Kit for Temperature Reading for EVo and PRO salt chlorinators – Kit NTC/1
KIT NTC/1 – Temperature reading Kit
This kit allows the BSV salt water chlorinator machine to detect the water pool temperature. Using Semi-automatic mode is possible to manage the production of the equipment according to the temperature of the water.
Compatibility | ||
---|---|---|
N-BSsalt | ✘ | |
EvoBasic | ✔ | |
EvoLowSalt | ✔ | |
EvoMg | ✔ | |
EvoLink | ✔ | |
PRO | ✔ |
Pahlen Overheating Limit Control unipole 60℃ – 632001
Overheating limit control unipole 60℃
Product Information | |
---|---|
Part Number | 632001 |
Item Name | Overheating limit control unipole 60℃ |
Compatible models | All Pahlen electric heaters |
Pahlen Flow Switch 0.5″ Brass Connection New Design – 12870
Flow switch with 1/2″ Brass Connection for Pahlen Compact (#1398XXXX) Electric Heaters – New Design
For old design see: #12860
Product Information | |
---|---|
Part Number | 12870 |
Item Name | Flow switch, external connection 1/2″ |
Compatible models | Compact Electric Heaters (#1398XXXX) |
Pahlen Flow Switch 0.5″ Brass Connection Old Design – 12860
Flow switch with 1/2″ Brass Connection for Pahlen Compact (#1398XXXX) Electric Heaters – Old Design
For new design see: #12870
Product Information | |
---|---|
Part Number | 12860 |
Item Name | Flow switch 230V/80W 1/2″ connection |
Compatible models | Compact Electric Heaters (#1398XXXX) |
Pahlen Thermostat 0 to 45℃ – 632009 – for 2022 onwards
Thermostat with 0 – 45℃ temperature range, unipole, with earth connection, for newer models of Pahlen electric heaters
Thermostat with graduated knob, single-pole, for installation in a junction box. The sensor is a flask that ends with a movable membrane. When the liquid in the flask is heated, excess pressure is transferred to the membrane, which deforms and opens the contact group. The opening temperature can be changed with the adjusting screw.
Product Information | |
---|---|
Part Number | 632009 |
Item Name | Thermostat 0 – 45℃, unipole |
Compatible models |
|
For older models, see: #12843 and #632002 (without earth connection)
Hayward Pressure Gauge Back Mount
Hayward Back Mount PRESSURE GAUGE replacement for
- Hayward Perflex EC65 SERIES
- Hayward Perflex EC65A SERIES
- Hayward Perflex EC75 SERIES
- Hayward Perflex EC75A SERIES
Top Sellers
- High quality filtration down to 2 microns
- Strong pumps for unparalleled suction
- Strong trapping of dirt; no back flow of dirt into pools
- Adjustable nozzles for greater filter suction
- Smart navigation and Gyroscope equipped — no messy travels
- Pre-programmed to prioritize floors — no fretting over tough, unreachable corners, and no time wasted over constant up and down walls
- Wall detection “Touch n Go” function — robot detects the wall as it approaches to reduce time reversing at each wall touch
- Pre-programmed to self-save when met with an obstacle — simply wait 2 minutes; no rescuing needed
- Control over smartphone App — control your robot right from your couch
- PVA brushes to clean all pool types, shapes, and sizes
- Top access filters for easy removal and prevents dirt from spilling everywhere
- Transparent filter lids for quick visual check on filter fullness
- Filter full indicator on power supply box
- Electronical swivel cable that prevents tangling, and is of high-quality material to ensure lastingness
- Dual drive motors to move in all directions
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.55m, diameter up to 0.7m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.5m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
BWT P600 APP Pool Robotic Cleaner with 23m cable and trolley
For large residential pools or small commercial pools
Powerful suction. Captures the finest dirt. Simple to use. Capable of handling tight spaces. Suitable for all pool types.
Cleaning capabilities:
Software Features:
Hardware Features:
Video & Technical Details below!
Messner Fountain Nozzle Bell Jet – 150 / 001240
Fountain jet nozzle with bell pattern.
Product Features:
Technical Specification | |
---|---|
Model | Bell Jet |
Part No. | 150 / 001240 |
Connection | 20mm |
Messner Foam Jet Fountain Nozzle – 150 / 001170
Foaming fountain nozzle jet.
Product Features:
Technical Specification | |
---|---|
Model | Foam Jet |
Part No. | 150 / 001170 |
Connection | 20mm |