Zodiac Clearwater Electrode Kit Kit Replacement (C200 / C250)
Zodiac Clearwater Ei Chlorine Generator Complete
CLEARANCE
Pool Guard Recessed Underwater LED Lights – 3W, 18W, 30W (Warm White)
Features:
- Lamp of solid structure and strict manufacturing process technology, high safety, long service life, low carbon energy saving
- Lamp material: Option for 304 or 316 stainless steel, plastic embedded part, high transparent toughened glass, anti-aging silicone seal, special waterproof cable
- IP68 waterproof index
- Suitable temperature: -20℃ to +45℃
- Control mode: single or internal
- Colour options upon request*: Red, Green, Purple, White, Warm White, Multi-colour
Technical specification of available models:
Model | Power | # of LEDs | Voltage | Light Angle | Weight |
PG-75GM | 3W | 3, 1W each | 12VAC | 10° ~ 90° | 0.5kg |
PG-200GM | 18W | 18, 1W each | 12VAC | 10° ~ 90° | 2.1kg |
PG-245GM | 30W | 30, 1W each | 24VAC | 10° ~ 90° | 2.5kg |
Pool Guard D.E. Powder – 10kg
Processed for use in diatomite pool to provide a layer of coat at the filter cloth to capture the finest suspended dirt particles. The grade has been carefully processed and tested to provide maximum efficiency.
- Diatomaceuous Earth 100%
- Water Solubility: <2.3
- pH: 9~10
To coat the filter grid for optimal filtration, the following amount is recommended for filling:
- Filter Area 24 ft2 – 1.1 kg
- Filter Area 36 ft2 – 1.65 kg
- Filter Area 48 ft2 – 2.2 kg
- Filter Area 60 ft2 – 2.7 kg
- Filter Area 72 ft2 – 3.3 kg
Pool Guard D.E. Element / Grid Complete Assembly – 24 sqft / 36 sqft / 48 sqft / 60 sqft / 72 sqft
Complete D.E. element/grid replacement assembly for your D.E. filter
The Pool Guard D.E. Element Complete Assembly consists of pre-assembled full set of D.E. element pieces of 7 Large + 1 Small complete with top manifold and bottom spider.
Product Features:
- Heavy-duty filter grids
- Made of 100% polypropylene cloth. Cloth is mildew, rot, and alkalis and acids resistant. Ensures filtration efficiency, dirt holding, and D.E. cake release, which enables it to withstand more backwashing which prolongs product life
- Welded seams prevent fraying and are stitched with heavy-duty string
- Reinforced grid spine provides stability and prevents snapping during handling
- Technical details are below
Compatible with: Pentair FNSP & NSP D.E. Filters. Replaces Unicel’s grid models: FS-2002, FS-2003, FS-2004, FS-2005, FS-2006.
For a version of the assembly with the element/grid set only, see: Pool Guard D.E. Element/Grid Set – 7 Large + 1 Small.
Pool Guard D.E. Element / Grid Single Replacement – Partial/Small – 24 sqft / 36 sqft / 48 sqft / 60 sqft / 72 sqft
Single (loose) D.E. element/grid for replacement – Partial/Small piece
This contains a single/loose piece of the Pool Guard D.E. Filter Element/Grid, size: Small/Partial. Perfect for if a single piece is only in need of replacement.
- For a complete replacement, see: Pool Guard D.E. Element Complete Assembly
- For replacement of the elements as a set only: Pool Guard D.E. Element/Grid Set – 7 Large + 1 Small
Product Features:
- Heavy-duty filter grids
- Made of 100% polypropylene cloth. Cloth is mildew, rot, alkalis and acids resistant. Ensures filtration efficiency, dirt holding, and D.E. cake release, which enables it to withstand more backwashing which prolongs product life
- Welded seams prevent fraying and are stitched with heavy-duty string
- Reinforced grid spine provides stability and prevents snapping during handling
- Technical details are below
Compatible with: Pentair FNSP and NSP D.E. filters. Replaces Unicel’s grid models: PG-1902, PG-1903, PG-1904, PG-1905, PG-1906.
Top Sellers
- High quality filtration down to 2 microns
- Strong pumps for unparalleled suction
- Strong trapping of dirt; no back flow of dirt into pools
- Adjustable nozzles for greater filter suction
- Smart navigation and Gyroscope equipped — no messy travels
- Pre-programmed to prioritize floors — no fretting over tough, unreachable corners, and no time wasted over constant up and down walls
- Wall detection “Touch n Go” function — robot detects the wall as it approaches to reduce time reversing at each wall touch
- Pre-programmed to self-save when met with an obstacle — simply wait 2 minutes; no rescuing needed
- Control over smartphone App — control your robot right from your couch
- PVA brushes to clean all pool types, shapes, and sizes
- Top access filters for easy removal and prevents dirt from spilling everywhere
- Transparent filter lids for quick visual check on filter fullness
- Filter full indicator on power supply box
- Electronical swivel cable that prevents tangling, and is of high-quality material to ensure lastingness
- Dual drive motors to move in all directions
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.55m, diameter up to 0.7m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.5m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
BWT P600 APP Pool Robotic Cleaner with 23m cable and trolley
For large residential pools or small commercial pools
Powerful suction. Captures the finest dirt. Simple to use. Capable of handling tight spaces. Suitable for all pool types.
Cleaning capabilities:
Software Features:
Hardware Features:
Video & Technical Details below!
Messner Fountain Nozzle Bell Jet – 150 / 001240
Fountain jet nozzle with bell pattern.
Product Features:
Technical Specification | |
---|---|
Model | Bell Jet |
Part No. | 150 / 001240 |
Connection | 20mm |
Messner Foam Jet Fountain Nozzle – 150 / 001170
Foaming fountain nozzle jet.
Product Features:
Technical Specification | |
---|---|
Model | Foam Jet |
Part No. | 150 / 001170 |
Connection | 20mm |