Praher 2-way Ball Valve PVC 40mm(1.5″)
- Compact design
- PTFE or PE ball seating joint
- Double sealed shaft
Technical Data Sheet:
| Product Information | |
|---|---|
| Part No. | 125470 |
| Valve type | 2-way Ball Valve |
| Material | PVC |
| Size | 40mm |
| Fitting | JIS |
PSH Pools Filtro 100/100 Prefilter
Cast iron pre-filters for suspended solids filtration. Placed at the pump’s inlet, they prevent impeller blocking. The system of cover fixing allows an easy access to the pre-filter basket for maintenance.
• Working pressure: 2 Bar.
• Working temperature: 60ºC Max.
Pre-filter housing and cover: Cast Iron.
Basket: Stainless Steel AISI 304.
Saci AS Series Submersible Pumps – AS 6/135-4 AS 6/180-3 AS 6/220-3 AS 6/220-4
Applications:
Submersible pumps for 6” wells minimum, highly suitable for civil and industrial installations, in sprinkler irrigation, communities, housing estates, etc
Constructive characteristics:
Submersible pumps with floating impellers and diffusers in Noryl. Each element includes contact rings and diffuser body in stainless steel. Shaft, cladding, sleeve, cable cover, suction grille, rings and bolts in stainless steel. Suction and drive body in stainless steel. Built-in stainless steel retention valve.
Maximum amount of sand: 60 g/m3
Maximum water temperature: +10°C to +40°C
Motor:
Price quoted is for submersible pumps with Saci FR motors. Franklin motors are available on request. Details on motors are further down below.
FR motor is in compliance with DIN and ISO standards with the following main features: Stator in stainless steel and non-toxic oil lubricated, international NEMA coupling, no need for maintenance. Maximum water temperature: + 40ºC
4″ motors are used for powers up to 10HP. 6″ motors are for powers above 10HP. In all cases, motors must adapt to required voltage.
Saci CF-4 series Centrifugal Pump – CF-4 750 / CF-4 1500 / CF-4 2000 / CF-4 2500
Commercial centrifugal pool pump
Product Key Benefits:
- Large volume low-speed centrifugal pump
- Complete with pre-filter basket (can be removed upon request) in AISI 316
- Motor and pump shafts connected by coupling. Shaft-coupling in AISI 316
- Pump body, support, and impeller in cast iron. Bronze impeller available on request
- Mechanical seal in carbon-silicon carbide. Also available on request: tungsten carbon, AISI 316, EPDM, Viton, etc
- Lubricated bearings for long durability
- Quiet and long lasting from motor’s low speed
- Cataphoresis or epoxy treatment for pump available on request
- Vertical version of pump also available on request
Motor:
- Standard asynchronous motor sealed from external ventilation
- Standard construction – can be replaced by other standard motors at any time and in any place
- Efficiency class: IE3
- 1,450 rpm @ 50Hz
- IP-55 protection, Class F insulation
- Max Noise: 71dB
Don’t see the model you are looking for? Contact us!
Top Sellers
- High quality filtration down to 2 microns
- Strong pumps for unparalleled suction
- Strong trapping of dirt; no back flow of dirt into pools
- Adjustable nozzles for greater filter suction
- Smart navigation and Gyroscope equipped — no messy travels
- Pre-programmed to prioritize floors — no fretting over tough, unreachable corners, and no time wasted over constant up and down walls
- Wall detection “Touch n Go” function — robot detects the wall as it approaches to reduce time reversing at each wall touch
- Pre-programmed to self-save when met with an obstacle — simply wait 2 minutes; no rescuing needed
- Control over smartphone App — control your robot right from your couch
- PVA brushes to clean all pool types, shapes, and sizes
- Top access filters for easy removal and prevents dirt from spilling everywhere
- Transparent filter lids for quick visual check on filter fullness
- Filter full indicator on power supply box
- Electronical swivel cable that prevents tangling, and is of high-quality material to ensure lastingness
- Dual drive motors to move in all directions
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.55m, diameter up to 0.7m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.5m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
BWT P600 APP Pool Robotic Cleaner with 23m cable and trolley
For large residential pools or small commercial pools
Powerful suction. Captures the finest dirt. Simple to use. Capable of handling tight spaces. Suitable for all pool types.
Cleaning capabilities:
Software Features:
Hardware Features:
Video & Technical Details below!
Messner Fountain Nozzle Bell Jet – 150 / 001240
Fountain jet nozzle with bell pattern.
Product Features:
| Technical Specification | |
|---|---|
| Model | Bell Jet |
| Part No. | 150 / 001240 |
| Connection | 20mm |
Messner Foam Jet Fountain Nozzle – 150 / 001170
Foaming fountain nozzle jet.
Product Features:
| Technical Specification | |
|---|---|
| Model | Foam Jet |
| Part No. | 150 / 001170 |
| Connection | 20mm |