-5%
Saci Smart Winner Pumps – Smart Winner 100 M / 150 M / 200 M / 300 M
For private and medium-sized pools, with a programmable controller for peace of mind
The new electronic system for pumps SMART Control applicable to the Winner Series is an integral system to command the installation. With a digital switchboard control panel added to the pump, it allows an easy and intuitive installation and complete control of the pool. The system incorporates the necessary protections for the pump and for people, time clocks and entries/exits for the management of the lighting system, salt chlorinator, heat pump, temperature probe, etc.
The system replaces the traditional control panel, and incorporates some new features:
- Control of other pool components:
- Clock programmer for filtration cycle up to 8 cycles a day
- Clock programmer for lighting cycle
- Programmable input for heat pump
- Lights button for Manual ignition, independent built-in countdown with the following ranges: 15 min, 30 min, 60 min, 60 min, 2 h, 4 h, 8 h
- Output for control of lights (also RGB leds)
- Output for salt chlorinator or running pump
- Pump protection:
- Ampère Control for overload
- Audible alarm for fault monitoring
- Control of lack of water / dry running
- Failures and incidents history list
- Totalizer of working hours, total/partial
- Multi language
- Pool cleaning:
- Notifications for sand filter and basket’s needed cleaning
- Skimming function to keep the pool surface clean
- Notifications for maintenance needed based on working hours
Don’t see the model you are looking for? Contact us!
-5%
Saci Winner Pump – Winner 75 M / 100 M / 150 M / 200 M / 200 T / 300 T
Self-priming pump for small and medium sized swimming pools
Product Key Benefits:
- Large pre-filter basket for high filter capacity. Helps reduce constant cleaning when pool is excessively dirty
- Transparent polycarbonate lid for easy inspection of prefilter basket interior
- Double connection, threads and fittings. 2″ female thread, PVC glue connections Ø 63 (JIS fittings supplied with pump)
- Cataphoresis painting
- Aluminium support base
- Stainless steel screws AISI-304
- Lubricated bearings for long durability and silent work
- No possible electric contact with the water as no part of the motor is in contact with it
Constructive characteristics:
- Pump body, pump body lid, base and diffuser made of polypropylene that is resistant to pool chemicals, and reinforced with glass fibre for long durability
- Impeller in Noryl
- Shaft in stainless steel AISI-316
- Mechanical seal in AISI-316. Suitable for saltwater pools
- Connection to 2” suction and drive
- Includes an easy open key
Motor:
- Sealed asynchronous motor with external ventilation
- Efficiency class: IE3
- 2,850 rpm @ 50Hz
- IP-55 protection, Class F insulation
- Max Noise: 69dB
MAXIMUM WATER TEMPERATURE: 40º C.
Don’t see the model you are looking for? Contact us!
-5%
Saci AS Series Submersible Pumps – AS 6/135-4 AS 6/180-3 AS 6/220-3 AS 6/220-4
Applications:
Submersible pumps for 6” wells minimum, highly suitable for civil and industrial installations, in sprinkler irrigation, communities, housing estates, etc
Constructive characteristics:
Submersible pumps with floating impellers and diffusers in Noryl. Each element includes contact rings and diffuser body in stainless steel. Shaft, cladding, sleeve, cable cover, suction grille, rings and bolts in stainless steel. Suction and drive body in stainless steel. Built-in stainless steel retention valve.
Maximum amount of sand: 60 g/m3
Maximum water temperature: +10°C to +40°C
Motor:
Price quoted is for submersible pumps with Saci FR motors. Franklin motors are available on request. Details on motors are further down below.
FR motor is in compliance with DIN and ISO standards with the following main features: Stator in stainless steel and non-toxic oil lubricated, international NEMA coupling, no need for maintenance. Maximum water temperature: + 40ºC
4″ motors are used for powers up to 10HP. 6″ motors are for powers above 10HP. In all cases, motors must adapt to required voltage.
-5%
Pentair IntelliFlo VF (Variable Flow) Pump – 011012
IntelliFlo Variable Flow (VF) High Performance Pumps
The IntelliFlo Variable Flow (VF) pumps has an onboard computer and intelligent software to automatically calculate and program the minimum flow requirements for every pool task–filtering, heating, cleaning, spa jets, water features, and more–to optimize performance and minimize energy use. As functions/tasks change, IntelliFlo self-adjusts to maintain optimal flow rates for further energy savings.
Featured Highlights
- Automatically monitors and adjusts flow rates to optimize performance and minimize energy use — reduces energy consumption by up to 90%
- Built-in diagnostics protect the Intelliflo pump from the most common causes of premature failure — loss of prime, overheating, freezing and voltage irregularities
- Permanent magnet motor and TEFC (totally enclosed fan cooled) design assure quietest operation of any pool pump
- Super-efficient permanent magnet motors produce far less heat and vibration, resulting in less stress and wear on pump components for longer life
- Compatible with IntelliTouch®, EasyTouch® and SunTouch® pool control systems
- Certification: CE, NSF, UL and CSA Listed
- Robust On Board Power Factor Correction
- Technical details below
-17%
Pentair WhisperFlo Pump – 347926-INT / 347927-INT / 347928-INT / 347929-INT / 011643 / 011644 / AP011516 / WHFL-1500-1P
WhisperFlo High Performance Pumps
Robust thermoplastic with the Cam & Ramp™ See-Through Lid design. Self-priming, high flow with Funnel-Flo™ Diffusers. 2 in. suction and discharge ports. Motor features threaded shaft and durable commercial duty 56 frame motor.
Featured Highlights
- Oversized strainer basket and volute – industry standard in pool pumps
- TEFC Motor available
- Lower HP’s deliver higher performance than industry standard
- Compatible with all cleaning systems, various filters and jet action spas
- Heavy-duty/durable construction designed for long life
- Designed for residential and commercial applications
-5%
Pentair 1.5″ All Purpose Plug with O-ring – 552622 (White) / 552624 (Black)
Product Features:
- All Purpose Flush Plug with O-ring
- Can be used to plug open fittings in pool walls
- In ABS
| Product Information | |
|---|---|
| Part Number | 552622 (White) or 552624 (Black) |
| Item Name | 1-1/2 in. plug with O-ring, white/black |
-15%
Pentair Return Fitting 1-1/2″ Threaded x 1-1/2″ Socket (Black) – 542419
Product Features:
- Standard Body Return Fitting
- For gunite/concrete pools
- ABS in Black
- 1-1/2″ threaded x 1-1/2″ socket
| Product Information | |
|---|---|
| Part Number | 542419 |
| Item Name | Standard body, 1-1/2 in. threaded x 1-1/2 in. socket, black |
-15%
Pentair Long Body Return Fitting – 1.5″ Threaded x 1.5″ Socket (White) – 542411
Long Body Return Fitting, 1-1/2″ Threaded x 1-1/2″ Socket, with Spacer/Locknut
- Long body return fitting
- For fiberglass pools and spas
- 1-1/2″ Threaded x 1-1/2″ Socket
- ABS material
- White
| Product Information | |
|---|---|
| Part Number | 542411 |
| Item Name | Long body, 1-1/2 in. threaded x 1-1/2 in. socket, spacer/locknut, white |
-5%
Pentair 1″ Directional Eyeball Inlet Fitting (Threaded) – 540028
1-1/2″ Threaded Directional Eyeball inlet
- 1″ opening with 1-1/2″ thread
- ABS material
- Wall fitting
- Eyeball for adjustable flow direction
- White only
| Product Information | |
|---|---|
| Part Number | 540028 |
| Item Name | 1 in. opening, white |
Top Sellers
- High quality filtration down to 2 microns
- Strong pumps for unparalleled suction
- Strong trapping of dirt; no back flow of dirt into pools
- Adjustable nozzles for greater filter suction
- Smart navigation and Gyroscope equipped — no messy travels
- Pre-programmed to prioritize floors — no fretting over tough, unreachable corners, and no time wasted over constant up and down walls
- Wall detection “Touch n Go” function — robot detects the wall as it approaches to reduce time reversing at each wall touch
- Pre-programmed to self-save when met with an obstacle — simply wait 2 minutes; no rescuing needed
- Control over smartphone App — control your robot right from your couch
- PVA brushes to clean all pool types, shapes, and sizes
- Top access filters for easy removal and prevents dirt from spilling everywhere
- Transparent filter lids for quick visual check on filter fullness
- Filter full indicator on power supply box
- Electronical swivel cable that prevents tangling, and is of high-quality material to ensure lastingness
- Dual drive motors to move in all directions
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.55m, diameter up to 0.7m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
- Rotatable nozzle for different spray patterns
- Fountain height up to 0.5m (dependent on pump equipped)
- Water volume control for different flow rates
- UV and corrosion-resistant thermoplastic PVC
- Made in Germany
-5%
BWT P600 APP Pool Robotic Cleaner with 23m cable and trolley
For large residential pools or small commercial pools
Powerful suction. Captures the finest dirt. Simple to use. Capable of handling tight spaces. Suitable for all pool types.
Cleaning capabilities:
Software Features:
Hardware Features:
Video & Technical Details below!
Messner Fountain Nozzle Bell Jet – 150 / 001240
Fountain jet nozzle with bell pattern.
Product Features:
| Technical Specification | |
|---|---|
| Model | Bell Jet |
| Part No. | 150 / 001240 |
| Connection | 20mm |
Messner Foam Jet Fountain Nozzle – 150 / 001170
Foaming fountain nozzle jet.
Product Features:
| Technical Specification | |
|---|---|
| Model | Foam Jet |
| Part No. | 150 / 001170 |
| Connection | 20mm |